Epoxycraft
Menu
  • Home
  • About
  • Epoxy Basics
  • How To
    • DIY
    • Artists
    • Board Sports
    • Woodworking
    • Boat Building
  • Trade Secrets
  • Projects
    • DIY
    • Artists
    • Board Sports
    • Woodworking
    • Boat Building
    • Motorsport
    • Aviation
    • Architecture
  • Meet The Maker
  • News
  • Contribute
  • Contact

Trade Secrets: Using a piping bag with epoxy
30th November 2016

Using a piping bag with epoxy

Got a lot of epoxy filleting to do? Or quite a few holes to fill? You might want to think about using a piping bag. It’s quick, clean and easy – and below, we explain exactly how to do it.

Whenever we go along to trade shows and boat shows, we typically demonstrate how to use a piping bag for filleting and filling. It’s exactly the same principle as piping icing onto a cake and people love it; without fail, you’ll hear someone say, “why didn’t I think of that idea?”.

It’s certainly a very handy technique for working quickly, especially if you’ve got quite a lot of fillets to make or small holes to fill. However, as with most tricks of the epoxy trade, there are a few rules and techniques to remember for the best results.

What kind of bag should I use?

You can use any strong, clean plastic bag, like the freezer bags you’d buy in the supermarket. If you really want to, you can even use a proper icing bag – including the nozzles, if you’re prepared to clean them afterwards! However, it’s not necessary at all. We’ve even used the plastic bag that the WEST SYSTEM® 101 Mini Pack comes in, and that works perfectly.

Just make sure the bag is strong; you don’t want it to split and leak epoxy all over your hands and your workspace.

How do I fill it?

It’s important to remember that you can only use piping bags with thickened epoxy. Straight resin and hardener mix will be too runny and will just slide out of the ends.

So, mix your resin and hardener and once thoroughly stirred add filler to produce a peanut butter consistency in your mixing pot, scoop it onto the mixing stick and push it into the corner of the bag, bit by bit until it’s filled.

As an additional tip, you can place your piping bag into a clean, empty container to help you fill it more easily. Just put the bag inside the container and roll the sides of the bag down, so that it’s easier to reach the bottom of the bag and put the epoxy straight in.

How do I use it?

Snip the corner of the bag off to the size of the epoxy blob or fillet that you desire, and – holding the mouth of the bag shut – squeeze the bag gently to push the epoxy out of the hole.

Remember that if you’re filleting, it’s best to wait until you’ve dispensed all the epoxy from the bag before you start shaping the fillets. Placing a mass of epoxy in a confined plastic bag will accelerate the exothermic reaction and make the epoxy go off more quickly – but once it’s out, the curing time will slow. The good news is that putting the epoxy into a piping bag should make it easy and fast to work with, so it shouldn’t accelerate the curing very much, if at all.

 

Thanks very much to Hamish Cook for this Trade Secret.

Want more advice on filleting? Have a look our two-part Trade Secret all about it.

Image credit: https://www.clcboats.com/life-of-boats-blog/build-a-small-boat-galley-box.html?jm=1 

 


Share on


Back to trade-secrets

Subscribe to our newsletter
Our unique epoxy knowledge and experience, delivered straight to you

Events

Future dates TBC

What is epoxy?

Epoxy Projects

UK Chandleries Open – January 2021

As England, Scotland and Wales enter another lockdown, you may have started work on those home projects. Whether it’s boat maintenance and repairs, a restoration or a brand new build,

Creating an Artisan Gold Ring with Canadian Maple and Epoxy

You may be surprised to learn that the UK is home to some of the finest gold around. Mark discovered this as a child when his father, Edward, would take

Heritage 9.9

Castagnola Launch Heritage 9.9

Castagnola Shipyard has launched the elegant, custom-made Heritage 9.9. Able to reach a cruising speed of 34 knots, the 10.91m custom-built luxury yacht is a fine example of what happens

Nick Zammeti Gets Creative with Epoxy and Liquorice Allsorts

What happens when you give Youtuber Nick Zammeti lots of epoxy and bags of Liquorice Allsorts? You get one incredibly funky table! Nick is well-known and loved in the industry

Meet the Maker – The Resin Reserve

Resin artist, alchemist, resin-gineer. Kate Ede of The Resin Reserve has always kept us in awe of her marvellous and beautiful creations. Inspired by patterns in nature, Kate is a

Split Film Festival Trophies

Creating the 2020 Split Film Festival Trophy

The Split Film Festival is one of the oldest film and video festivals in Croatia, showcasing new films and radical works of all styles, themes and genres. The festival celebrated

Hot Box

How to keep your epoxy warm in winter: build a hotbox

Winter is a challenging time for epoxy products. Warmth is needed to keep the resin fluid enough for dispensing pumps to work well and cold ambient temperature can greatly reduce

How to Work With Epoxy in Cold Weather

The frosty mornings and dark evenings are drawing near. There are projects that need finishing, but what do you do when epoxy and cold weather don’t get on too well.

Mas Snowboard

Snowboard Enthusiasts Taking On The World With Incredible Designs

To many a holidaymaker, Turkey is a haven of golden sand beaches, historic landmarks and party towns. However, it’s not just those looking to top up on their tan that

Class Xero Yacht

Class Xero Combines Coffee and Epoxy in Sustainable Yacht Design

Image credit: Alec Smith - https://www.imagemundi.com Craig Palmer, based in Worthing, is looking at opportunities to bring the marine industry together in a collaborative way. In the middle of building

Craobh Woodwork

Bringing a New Lease of Life to Reclaimed Scottish Timber

Tucked away in the highlands of Scotland is the small village of Culbokie, home to Craobh Woodwork and artisan Bruce Neill. Specialising in producing bespoke timber products from the highest

Final Bar Design

Cheers! Leeds Furniture Maker Creates a Bar Worth Celebrating

James McKay has been a creator since his early years. His fascination for creativity guided his interest into art, design and technology during his school years. James went on to

  • Home
  • Epoxy Basics
  • Projects
    • DIY
    • Artists
    • Board Sports
    • Woodworking
    • Boat Building
    • Motorsport
    • Architecture
    • Aviation
  • Trade Secrets
  • How To
    • DIY
    • Artists
    • Board Sports
    • Boat Building
    • Woodworking
  • News
  • Privacy Policy
  • Contribute
  • Contact
West System
Pro-Set
Entropy Resins
Subscribe to our newsletter
Copyright © 2021 Epoxycraft | Website by MAA