WEST SYSTEM: Fibreglass boat repair: how to install a raw water seacock
31st March 2015

Fibreglass boat repair: how to install a raw water seacock

It’s pretty fundamental; if boats are not to sink their seacocks can’t leak. It’s also one of the reasons why any seacock repair must be done properly and with care.

After discovering a loose seacock in his 1981 Nor’sea 27, boat repair aficionado Daniel set to work fitting a new, sturdier replacement using fibreglass and WEST SYSTEM® epoxy. In his blog post he shares his step-by-step instructions on the whole project, taking the reader through the process from start to finish and providing some very useful links to further online resources.

Back to westsystem

Stunning colour tints for epoxy creations added to ENTROPY RESINS® range

An exciting line of liquid colours has been released to add bold and beautiful tints to epoxy. The tints are part of the bio-based Entropy Resins® product range and can

Life After Pi lifeboat refit

Oarsome Chance, the Gosport based charity, has been using WEST SYSTEM epoxy® to aid in a classic engine refit. It’s ‘fixing-up’ the lifeboat which was used in the award-winning documentary

Man builds tank with WEST SYSTEM epoxy

If you follow the M4 west as far as it goes, you’ll arrive in the small Welsh village of Crosshands, home to a 'Panzerkampfwagen VI' (more commonly known as the Tiger 1

The Structural Repair of Wingspread

Wingspread, a Frank Lloyd Wright-designed residence near Racine, Wisconsin, was in desperate need of stabilisation, writes Brian Knight. The roof and side walls were showing movement and cracks caused by

Wessex Resins extends manufacturing premises

This is the extension which is currently being built at Wessex Resins and Adhesives factory in Romsey, Hampshire. It’s due to fully complete this September, a year after ground was

PRO-SET® epoxies and WEST SYSTEM® resin and hardener combinations gain approvals

The following PRO-SET epoxy systems have been approved by DNV GL for use on ships, yachts and as ‘laminating resin for construction of laminates made of fibre reinforced plastics’: INF-114

Chandleries currently open (June 2020)

We’re all eagerly anticipating the reopening of retail outlets. In the meantime, if you’re looking to stock up on your favourite epoxy brands, here are some WEST SYSTEM®, PRO-SET® and

Making a bottle-top bar using Entropy Resins Clear Casting Epoxy

If you’ve ever fancied a bar in your house, check out this beauty built by Paul Luffman, Production Manager at Wessex Resins and Adhesives. He’s been collecting bottle tops since

Rochfort Customs: making exquisite boards with Entropy Resins

Brad Rochfort is garage shaper who takes the ultimate care with his boards. He says: “People have to be happy to wait for a board.” It’s testament to the quality

Using plants, like dandelions, in ‘resin-art’ (encasing in epoxy)

Nick Zammeti is well known in the world of creatives for making weird and wonderful experiments like his flux capacitor with crystal-clear Entropy Resins® Epoxy. In one of his most

WEST SYSTEM epoxy set to go sub-orbital

A NOVA 2 rocket being developed by Starchaser is within ten months of its first launch.  This one-seater rocket is a significant step towards future plans which include a rocket

Stunning roof built for beach club on French Riviera

This is the Palmier Club on the beach of Pampelonne in Saint-Tropez. The roof’s built by Monfrino Marine Charpente (with products supplied by Directeck), it’s an incredible creation, stunning inside