Trade Secrets: Getting started: dispensing and mixing WEST SYSTEM epoxy
7th May 2014

Getting started: dispensing and mixing WEST SYSTEM epoxy

Before every epoxy application comes the crucial step of dispensing the quantities of resin and hardener you need. Getting this right will mean you’re well on the way to achieving a high-strength WEST SYSTEM® epoxy solid.

Remember, curing epoxy generates heat so be sure not to leave the dispensed epoxy to stand for the full pot life in the mixing cup. It might melt!

This video demonstrates the right way to dispense and then mix your WEST SYSTEM resin and hardener.

Got the info but need the equipment? Find out where to buy WEST SYSTEM resin and hardener.

Back to trade-secrets

Hot Box

How to keep your epoxy warm in winter: build a hotbox

Winter is a challenging time for epoxy products. Warmth is needed to keep the resin fluid enough for dispensing pumps to work well and cold ambient temperature can greatly reduce

How to Work With Epoxy in Cold Weather

The frosty mornings and dark evenings are drawing near. There are projects that need finishing, but what do you do when epoxy and cold weather don’t get on too well.

Mas Snowboard

Snowboard Enthusiasts Taking On The World With Incredible Designs

To many a holidaymaker, Turkey is a haven of golden sand beaches, historic landmarks and party towns. However, it’s not just those looking to top up on their tan that

Class Xero Yacht

Class Xero Combines Coffee and Epoxy in Sustainable Yacht Design

Image credit: Alec Smith - https://www.imagemundi.com Craig Palmer, based in Worthing, is looking at opportunities to bring the marine industry together in a collaborative way. In the middle of building

Craobh Woodwork

Bringing a New Lease of Life to Reclaimed Scottish Timber

Tucked away in the highlands of Scotland is the small village of Culbokie, home to Craobh Woodwork and artisan Bruce Neill. Specialising in producing bespoke timber products from the highest

Final Bar Design

Cheers! Leeds Furniture Maker Creates a Bar Worth Celebrating

James McKay has been a creator since his early years. His fascination for creativity guided his interest into art, design and technology during his school years. James went on to

Work by CNC Polystyrene

From London Cafés to The Big Screen. Epoxy in the Entertainment Industry

Tucked away on the outskirts of Winchester, the most wild and wonderful creations are coming to life thanks to CNC Polystyrene. “We work for pretty much every corner of the

Stunning colour tints for epoxy creations added to Entropy Resins® range

An exciting line of liquid colours has been released to add bold and beautiful tints to epoxy. The tints are part of the bio-based Entropy Resins® product range and can

Life After Pi lifeboat refit

Oarsome Chance, the Gosport based charity, has been using WEST SYSTEM epoxy® to aid in a classic engine refit. It’s ‘fixing-up’ the lifeboat which was used in the award-winning documentary

Man builds tank with WEST SYSTEM epoxy

If you follow the M4 west as far as it goes, you’ll arrive in the small Welsh village of Crosshands, home to a 'Panzerkampfwagen VI' (more commonly known as the Tiger 1

The Structural Repair of Wingspread

Wingspread, a Frank Lloyd Wright-designed residence near Racine, Wisconsin, was in desperate need of stabilisation, writes Brian Knight. The roof and side walls were showing movement and cracks caused by

Wessex Resins extends manufacturing premises

This is the extension which is currently being built at Wessex Resins and Adhesives factory in Romsey, Hampshire. It’s due to fully complete this September, a year after ground was